?
本公司专业生产履带式抛丸机,吊钩式抛丸机,悬链式抛丸机,钢板、钢结构抛丸机,通过式抛丸机等也可根据产品特点进行非标定制,只需一个电话免费为您提供合适的技术方案。咨询热线:0515-88323729
行业新闻
通过式抛丸机出口品牌供应商,外贸公司首选合作伙伴,就是靠谱!
时间:2020-04-30 15:13:44  来源:通过式抛丸机供应商   作者:通过式抛丸机厂家

大型钢管外壁除锈抛丸机.jpg

通过式抛丸机出口品牌供应商,外贸公司首选合作伙伴,就是靠谱!通过式抛丸机外贸公司采购都找AG旗舰厅免费版机械,性价比就是高哦!盐城市AG旗舰厅免费版机械制造有限公司是一家多年的抛丸设备生产制造商,抛丸机品种齐全,品质保证,多年的外贸出口经验,可以为客户提供国外安装调试。

The roller type shot blasting cleaning machine is to hang the workpiece on the conveying roller table, and the roller table conveying system will transport the workpiece forward. When the workpiece enters the cleaning room, the shot blasting machine starts to work in sequence. After shot blasting, the oxide skin, dirt and other attachments on the steel surface are cleaned, and the treated surface can reach sa2-2.5. The working mode of shot blasting machine is continuous circulation.

The shot thrown by the shot blasting machine is collected and processed by the circulation treatment system, and continues to be used by the shot blasting machine. The working mode of the circulation system is as follows: the scattered pellets are transported to the bucket elevator through the lower longitudinal screw conveyor and slope, the bucket elevator lifts the pellets and sundries to the upper part of the cleaning room, and the upper horizontal screw conveyor transports them to the high-efficiency be separator. After being processed by the be separator, the dust and sundries are separated from the good pellets, and the good pellets are stored in the storage hopper for shot blasting Use of the device.

In order to deal with the large amount of dust produced during shot blasting, the machine is equipped with a high-efficiency new-type lt-24 pulse dust remover. The dust remover has small volume, high dust removal efficiency, convenient installation and maintenance, and the purified air is greatly lower than the smoke emission standard of the same industry.


???